Fluid Level Check

Fluid level should be checked with the fluid warmed up to 50 to 80°C (122 to 176°F). The fluid level check procedure is as follows:

1. Check for fluid leakage.
2. With the engine warmed up, drive the vehicle in an urban area. When ambient temperature is 20°C (68°F), it takes about 10 minutes for the CVT fluid to warm up to 50 - 80°C (122 - 176°F).
3. Park the vehicle on a level surface.
4. Apply parking brake firmly.
5. With engine at idle, while depressing brake pedal, move shift selector throughout the entire shift range.
   Fig 1: Identifying CVT Fluid Leakage

   Courtesy of NISSAN MOTOR CO., U.S.A.
6. Pull out the CVT fluid level gauge from the CVT fluid charging pipe after pressing the tab on the CVT fluid level gauge to release the lock.
   Fig 2: Removing CVT Fluid Level Gauge From CVT Fluid Charging Pipe

   Courtesy of NISSAN MOTOR CO., U.S.A.
7. Wipe fluid off the CVT fluid level gauge and rotate the CVT fluid level gauge attached for 180° to securely insert the CVT fluid level gauge until it meets the end of the CVT fluid charging pipe.
   CAUTION: When wiping away the A/T fluid level gauge, always use lint-free paper, not a cloth one.
   Fig 3: Inserting CVT Fluid Level Gauge

   Courtesy of NISSAN MOTOR CO., U.S.A.
8. Place the selector lever in P or N and make sure the fluid level is within the specified range.
   CAUTION:

   • When CVT fluid level gauge reinstall, insert CVT fluid charging pipe until CVT fluid level gauge is locking surely.
   Fig 4: Identifying CVT Fluid Level Gauge Markings

   Courtesy of NISSAN MOTOR CO., U.S.A.