Auto Stop Operation
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
When the wiper arms are not located at the base of the windshield, and the wiper switch is turned OFF, the wiper motor will continue to operate until the wiper arms reach windshield base. When wiper arms reach base of windshield, front wiper motor terminals 1 and 4 are connected.
Ground is supplied
- to terminal 32 of the IPDM E/R
- through front wiper motor terminal 4
- through terminal 1 of the front wiper motor
- through body grounds E15, E24, and E9.
The IPDM E/R sends auto stop operation signal to BCM through CAN communication lines.
When BCM receives auto stop operation signal, BCM sends wiper stop signal to IPDM E/R with CAN communication lines. The IPDM E/R then de-energizes the front wiper relay.
Wiper motor will then stop wiper arms at the STOP position.