Abs Warning Lamp Inspection
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure ABS warning lamp turns on for approximately 1 second when the ignition switch is turned ON. Check CAN communications. If there are no errors with CAN communication system, check combination meter. Refer to COMBINATION METERS .
- Make sure the lamp turns off approximately 1 second after the ignition switch is turned ON. If the lamp does not turn off, conduct self-diagnosis.
- Make sure ABS warning lamp turns off approximately 2 seconds after the engine is started. If ABS warning lamp has not turned off 10 seconds after the engine has been started, conduct self-diagnosis of the ABS actuator and electric unit (control unit).
- After conducting the self-diagnosis, be sure to erase the error memory. Refer to CONSULT-II Function .