FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1441 (Front Suspension) › Compression Rod › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove tire with power tool.
  2. Remove undercover with power tool.
  3. Remove front cross bar from vehicle with power tool.
  4. Remove cotter pin of compression rod ball joint, and loosen nut.
  5. Use a ball joint remover (suitable tool) to remove compression rod from steering knuckle. Be careful not to damage ball joint boot.
    CAUTION: Tighten temporarily mounting nut to prevent damage to threads and to prevent ball joint remover (suitable tool) from coming off.
  6. Remove compression rod from vehicle.
About FixVault