Removal And Installation For Compressor: Removal

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
Remove the engine under cover and the splash shield.
Remove the drive belt. Refer to "DRIVE BELTS ".
Remove the compressor mounting stud.
Disconnect the compressor connector.
Disconnect the high-pressure flexible hose and low-pressure flexible hose from the compressor.
CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
Remove the compressor bolts and nut using power tools.