With Consult-II

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch ON.
Select "DATA MONITOR" mode with CONSULT-II.

Fig 1: CONSULT-II Data Monitor Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Turn ignition switch OFF, wait at least 10 seconds.
Turn ignition switch ON.
Repeat step 3 to 4 for 32 times.
If 1 st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "