Removal and Installation

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.

CAUTION:

Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.

Position the fender protector aside.
Disconnect electrical connector.
Remove bolt and pull fog lamp out of front fascia.

Fig 1: Removing Fog Lamp Bolt
Courtesy of NISSAN MOTOR CO., U.S.A.

Installation is in the reverse order of removal.