FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1576 (Glass, Window System & Mirrors) › Power Window System › Limit Switch Circuit Check Front RH

Limit Switch Circuit Check Front RH

WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH LIMIT SIGNAL 
    1. Turn ignition switch ON.
    2. Check voltage between power window and door lock/unlock switch RH connector D105 terminal 15 and ground.
      Fig 1: Checking Voltage Between Power Window And Door Lock/Unlock Switch RH Connector D105 Terminal 15 And Ground
      G03600253Courtesy of NISSAN MOTOR CO., U.S.A.
      VOLTAGE BETWEEN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH CONNECTOR D105 TERMINAL 15 AND GROUND REFERENCE

      Connector Terminals (Wire color) Condition Voltage (V) (Approx.)
      (+) (-)
      D105 15 (G/W) Ground Passenger side door window is between fully-open and just before fully-closed position (ON) 0
      Passenger side door window is between just before fully closed position and fully closed position (OFF) 5

    OK or NG

    • OK : Limit switch circuit is OK.
    • NG : GO TO 2.
  2. CHECK LIMIT SWITCH GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect front power window motor RH.
    3. Check continuity between front power window motor RH connector D104 terminal 5 and ground.
      Fig 2: Checking Continuity Between Front Power Window Motor RH Connector D104 Terminal 5 And Ground
      G03600254Courtesy of NISSAN MOTOR CO., U.S.A.

      5 (G/W) - Ground : Continuity should exist  .

    OK or NG

    • OK : GO TO 3.
    • NG : GO TO 5.
  3. CHECK LIMIT SWITCH GROUND CIRCUIT 

    Check continuity between front power window motor RH connector D104 terminal 6 and ground.

    Fig 3: Checking Continuity Between Front Power Window Motor RH Connector D104 Terminal 6 And Ground
    G03600255Courtesy of NISSAN MOTOR CO., U.S.A.

    6 (W/B) - Ground : Continuity should exist  .

    OK or NG

  4. CHECK HARNESS CONTINUITY 
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between front power window motor RH connector D104 terminal 6 and power window and door lock/unlock switch RH connector D105 terminal 3.
      Fig 4: Checking Continuity Between Front Power Window Motor RH Connector D104 Terminal 6 And Power Window And Door Lock/Unlock Switch RH Connector D105 Terminal 3
      G03600256Courtesy of NISSAN MOTOR CO., U.S.A.

      6 (W/B) - 3 (W/B) : Continuity should exist  .

    OK or NG

    • OK : Replace power window and door lock/unlock switch RH. Refer to "FRONT DOOR ".
    • NG : Repair or replace harness.
  5. CHECK HARNESS CONTINUITY 
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between power window and door lock/unlock switch RH connector D105 terminal 15 and front power window motor RH connector D104 terminal 5.
      Fig 5: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector D105 Terminal 15 And Front Power Window Motor RH Connector D104 Terminal 5
      G03600257Courtesy of NISSAN MOTOR CO., U.S.A.

      15 (G/W) - 5 (G/W) : Continuity should exist  .

    OK or NG

    • OK : Replace power window and door lock/unlock switch RH. Refer to "FRONT DOOR ".
    • NG : Repair or replace harness.
About FixVault