FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1653 (Transfer Case) › Trouble Diagnosis For System › CAN Communication Line › Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAN COMMUNICATION CIRCUIT 

    With CONSULT-II 

    1. Turn ignition switch "ON" and start engine.
    2. Select "SELF-DIAG RESULTS" mode for "ALL MODE AWD/4WD" with in CONSULT-II.
      3. Fig 1: CONSULT II SELF DIAG RESULTS Screen
      G04186395Courtesy of NISSAN MOTOR CO., U.S.A.
    3. Perform the self-diagnosis.

    Is the "CAN COMM CIRCUIT [U1000]" displayed? 

    YES: Print out CONSULT-II screen and go to "PRECAUTIONS WHEN USING CONSULT-II ".

    NO: Inspection End

About FixVault