FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1766 (Brake System (Sedan)) › Preparation › Commercial Service Tools

Commercial Service Tools

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
COMMERCIAL SERVICE TOOLS

Tool name Description
  1. Flare nut crowfoot

    a:10 mm (0.39 in) (Other)

    a:12 mm (0.47 in) (Between VDC actuator and master cylinder)

  2. Torque wrench
G04076680Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing brake piping
Power tool
G04083840Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing front/rear caliper assembly and tire
Pin punch Tip diameter: 4 mm (0.16 in) dia
G04121915Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing reservoir tank pin
About FixVault