CONSULT-II Function (AUTO DRIVE POS.): Notes
WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II FUNCTION
| CONSULT-II diagnosis items | Inspection item, self-diagnosis mode | Content | Reference | |||||
|---|---|---|---|---|---|---|---|---|
| AUTO DRIVE POSITIONER | WORK SUPPORT(1) | Changes the setting for each function. | - | |||||
| SELF-DIG RESULTS | Check the self-diagnosis results. | SELF-DIAGNOSIS RESULTS | ||||||
| DATA MONITOR | Selection from menu | Displays the input data to driver seat control unit and automatic driving positioned control unit on real-time basis. | DATA MONITOR | |||||
| CAN DIAG SUPPORT MONITOR | The results of transmit / receive diagnosis of CAN communication can be read | CAN DIAGNOSTIC SUPPORT MONITOR | ||||||
| ACTIVE TEST(2) | Gives a drive signal to a load to check the operation. | ACTIVE TEST | ||||||
| ECU PART NUMBER | Displays driver seat control unit part No. | - | ||||||
| BCM | DATA MONITOR | Selection from menu | Displays the input data to BCM on real-time basis | CONSULT-II APPLICATION | ||||
|
||||||||