FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1770 (Seats (Sedan)) › Automatic Drive Positioner › Terminals and Reference Values for Automatic Drive Positioner Control Unit

Terminals and Reference Values for Automatic Drive Positioner Control Unit

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUES FOR AUTOMATIC DRIVE POSITIONER CONTROL UNIT

TERMINAL WIRE COLOR ITEM CONDITION VOLTAGE (V)
(Approx.)
1 Y/G Tilt switch UPWARD signal Tilt switch turned to upward 0
Other than above 5
7 OR/L Tilt sensor signal Tilt position, top 1
Tilt position, bottom 4
10 R/L UART LINE (TX) Memory switch 1 or 2 operated
G04077620Courtesy of NISSAN MOTOR CO., U.S.A.
11 P/L Telescopic switch
FORWARD signal		 Telescopic switch turned to forward 0
Other than above 5
17 LG/B Tilt switch DOWNWARD signal Tilt switch turned to downward 0
Other than above 5
23 R/Y Telescopic sensor input Telescopic position, top 0.4
Telescopic position, bottom 0.6
26 R/G UART LINE (RX) Memory switch 1 or 2 operated
G04077618Courtesy of NISSAN MOTOR CO., U.S.A.
27 G/W Telescopic switch
BACKWARD signal		 Telescopic switch turned to backward 0
Other than above 5
33 W/L Sensor power supply - 5
34 GY(1) or Y/R(2) Power source (Fuse) - Battery voltage
35 G/Y Tilt motor UPWARD signal Tilt switch turned to upward Battery voltage
Other than above 0
36 R Telescopic motor
FORWARD signal		 Telescopic switch turned to forward Battery voltage
OFF 0
39 W Battery power supply - Battery voltage
40 B Ground (signal) - 0
41 Y Sensor ground - 0
42 G/W Tilt motor DOWNWARD signal Tilt switch turned to downward Battery voltage
Other than above 0
44 G Telescopic motor
BACKWARD signal		 Telescopic switch turned to backward Battery voltage
Other than above 0
48 B Ground (power) - 0
(1) With A/T
(2) With M/T
About FixVault