Vehicle Security System Alarm Operation

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle security system is triggered by

opening a door
unlocking door without using the key or keyfob.

The vehicle security system will be triggered once the system is in armed phase,

when BCM receives a ground signal at terminals 12, 13, 62, 63 (door switch), or terminal 58 (back door switch).

Power is supplied at all times

to horn relay terminal 2
through 15A fuse (No. 25, located in fuse and fusible link box).

When the vehicle security system is triggered, ground is supplied intermittently

from IPDM E/R terminal 51
to headlamp high relay and
to horn relay terminal 1.

The headlamps flash and the horn sounds intermittently.

The alarm automatically turns off after 50 seconds, but will reactivate if the vehicle is tampered with again.