Memory Storing And KEYFOB Interlock Storing
WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Store the 2 driving positions with the seat memory switch.
- Keyfob interlock function is set simultaneously with setting driving position memory. It can set driving position to memory position.
- Turn ignition switch ON.
- A/T selector lever in P position.
- Adjust the position of front seat LH, door mirrors and steering wheel with manual operation.
- Press set switch.
- Indicator LED for which front seat LH positions are already retained in memory is illuminated for 5 seconds.
- Indicator LED for which front seat LH positions are not retained in memory is illuminated for 0.5 seconds.
- Press seat memory switch for which driving positions are to be entered in memory for more than 0.5 seconds within 5 seconds after pressing the set switch while the indicator LED is illuminated.
- To enter driving positions in blank memory, indicator LED will be illuminated for 5 seconds.
- To modify driving positions, indicator LED will be turned off for 0.5 seconds then illuminated for 5 seconds.
- Does keyfob interlock set?
If you need storing of keyfob interlock, GO TO 7.
If you do not need storing of keyfob interlock, the memory storing is finished. Confirm memory operation.
- Press keyfob unlock button within 5 seconds after pressing seat memory switch (while seat memory switch LED is illuminated).
- If setting completes, indicator of registered memory turns on for 5 seconds.
- Confirm memory operation with seat memory switch and keyfob.
NOTE:
- If another keyfob interlock function setting is performed by same key, newly registered setting is valid.
- If new memory string is performed to memory switch that already set keyfob interlock function, keyfob interlock function setting is maintained.
- If keyfob does not set previously, keyfob interlock function cannot set.