FixVault

Ignition Key Cylinder Light: Inspection

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSPONDER KEY AMPLIFIER 
    1. Inspect the ignition key cylinder light operation.
      1. Connect the battery positive (+) lead to terminal 2 and the battery negative (-) lead to terminal 6, and then check that the light comes on.

        OK: Light comes on. 

        Fig 1: Identifying Transponder Key Amplifier Connector Terminals
        G04224192Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002