Illumination Signal Check for NAVI Control Unit
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ILLUMINATION SIGNAL
- Turn the ignition switch ON.
- Check voltage between NAVI control unit and ground.TERMINALS VOLTAGE CHART
Terminals Lighting switch position (+) (-) Connector Terminal 1st or 2nd position OFF B505 61 Ground Battery voltage Approx. 0V
OK or NG
OK: Replace NAVI control unit. Refer to "NAVI CONTROL UNIT ".
NG: Check harness for open or short between NAVI control unit and IPDM E/R.