Removal and Installation: Notes

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

When servicing the SRS, do not work from directly in front of air bag module.
Always place front passenger air bag module with caution label side facing upward.

CAUTION:

Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3 minutes.
Do not insert any foreign objects (screwdriver, etc.) into air bag module or harness connectors.
Do not disassemble air bag module.
Do not use old bolts after removal; replace with new bolts.
Do not expose the front passenger air bag module to temperatures exceeding 90°C (194°F).
Replace the air bag module if it has been dropped or sustained an impact.
Do not allow oil, grease or water to come in contact with the air bag module.

Fig 1: Identifying Front Passenger Air Bag Module

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Precaution For Handling Air Bag Module

Courtesy of NISSAN MOTOR CO., U.S.A.