FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 2070 (Instrument Panel) › Center Console Assembly › Rear Center Console › Disassembly And Assembly › Disassembly

Disassembly And Assembly: Disassembly

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear center console. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove cup holder assembly.
  3. Remove screws and rear console lid assembly.
  4. Disconnect harnesses and remove switch finisher and switch assembly.
    • Remove screws to separate switch finisher and switch assembly.
  5. Remove screws and rear console tray.
    • Disconnect harnesses.
    • Remove power point assembly.
    • Remove rear console lamp (if equipped).
  6. Remove screws and front lid assembly.
  7. Remove screws and striker from rear pass through assembly.
  8. Remove rear pass through lid assembly.
  9. Remove screws, lock assembly and key cylinder.
About FixVault