FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 2070 (Instrument Panel) › Instrument Panel Assembly › Lower Driver Instrument Panel › Removal

Lower Driver Instrument Panel: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuse block cover.
    Fig 1: Locating Fuse Block Cover
    G04917308Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove lower driver instrument panel screws using power tool.
  3. Remove lower driver instrument panel.
  4. Disconnect aspirator tube and in vehicle temperature sensor.
  5. Disconnect the foot well lamp socket from the lower driver instrument panel.
  6. Disconnect electrical harness connectors.
    Fig 2: Identifying Lower Driver Instrument Panel Screws
    G04917309Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault