Lighting Switch Inspection

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK LIGHTING SWITCH INPUT SIGNAL
With CONSULT-III

Select "BCM "on CONSULT-III. With "HEAD LAMP "data monitor, make sure "AUTO LIGHT SW "turns ON-OFF linked with operation of lighting switch.

When lighting switch is in: AUTO LIGHT SW ON

AUTO position

Without CONSULT-III

Refer to "COMBINATION SWITCH INSPECTION ".

OK or NG

OK: Inspection End.

NG: Check lighting switch. Refer to "COMBINATION SWITCH INSPECTION ".