Engine Room
WARNING: This page is about a different car, the 2004 Nissan Murano and 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect heater hoses.
- Install plug to avoid leakage of engine coolant.
- Remove EVAP hose.
- Disconnect fuel hose quick connector at centralized under-floor piping side. Refer to FUEL INJECTOR AND FUEL TUBE
.
- Install plug to avoid leakage of fuel.
- Disconnect transaxle shift control cable.
- Disconnect power brake booster vacuum hose at engine side.
- Remove alternator. Refer to GENERATORS & REGULATORS .
- Remove A/C compressor with piping connected, and temporarily secure it aside. Refer to COMPONENTS .
- Disconnect reservoir tank for power steering from engine compartment bracket and position it aside.