Preliminary Check
WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OPERATION OF SELF-DIAGNOSIS MODE (COMBINATION METER)
Perform self-diagnosis mode of combination meter. Refer to "SELF-DIAGNOSIS MODE OF COMBINATION METER ".
Does self-diagnosis mode operate normally?
Yes: GO TO 2.
No: GO TO 3.
- CHECK COMBINATION METER (CONSULT-III)
Perform self-diagnosis of combination meter. Refer to "SELF-DIAGNOSTIC RESULTS ".
Self-diagnostic results
No malfunction detected >> Inspection End.
Malfunction detected >> Refer to "DISPLAY ITEM LIST ".
- CHECK POWER SUPPLY AND GROUND CIRCUIT OF COMBINATION METER
Check power supply and ground circuit of combination meter. Refer to "POWER SUPPLY AND GROUND CIRCUIT INSPECTION ".
OK or NG
OK: Replace combination meter. Refer to "COMBINATION METER ".
NG: Repair power supply and ground circuit of combination meter.