FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 2123 (Brake Control System) › Service Information › Trouble Diagnosis › CONSULT-III Function (ABS) › Active Test › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the CONSULT-III and CONSULT-III CONVERTER to the data link connector and start the engine.
    CAUTION: If CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
  2. Touch "ABS".

    If "ABS" is not indicated, go to "CONSULT-III DATA LINK CONNECTOR (DLC) CIRCUIT ".

  3. Touch "ACTIVE TEST".
  4. The "SELECT TEST ITEM" screen is displayed.
  5. Touch necessary test item.
  6. With the "MAIN SIGNALS" display selected, touch "START".
  7. The Active Test screen will be displayed, so conduct the following test.
About FixVault