Connecting Rod Side Clearance

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Measure the side clearance between connecting rod and crankshaft arm with feeler gauge.
Standard : 0.20 - 0.35 mm (0.0079 - 0.0138 in)

Limit : 0.40 mm (0.0157 in)
If the measured value exceeds the limit, replace connecting rod, and measure again. If it still exceeds the limit, replace crankshaft also.

Fig 1: Measuring Side Clearance Between Connecting Rod And Crankshaft Arm