Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front kick plate. Refer to "REMOVAL AND INSTALLATION ".
Position the front door welt aside.
Remove the front pillar upper finisher. Refer to "REMOVAL AND INSTALLATION ".
Remove the lower glove box. Refer to "EXPLODED VIEW ".
Remove the upper glove box. Refer to "EXPLODED VIEW ".
Disconnect the intake sensor electrical connector.
NOTE: The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
Twist the intake sensor to remove the intake sensor from the front heater and cooling unit assembly.

Fig 1: Identifying Intake Sensor, Front Heater And Cooling Unit Assembly