FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 2220 (Meter, Warning Lamp & Indicator) › Basic Inspection › Diagnosis And Repair Workflow › Work Flow › Detailed Flow

Detailed Flow

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. CONFIRM SYMPTOM

    Confirm symptom or customer complaint.

    GO TO 2

  2. CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER

    Perform self-diagnosis of combination meter. Refer to "DIAGNOSIS DESCRIPTION ".

    Does self-diagnosis mode operate? 

    YES: GO TO 3

    NO: Check power supply and ground circuit of combination meter. Refer to "COMBINATION METER: DIAGNOSIS PROCEDURE ". Then, GO TO  4

  3. CHECK COMBINATION METER (CONSULT)

    Select "METER/M&" on CONSULT and perform "SELF-DIAGNOSIS" of combination meter. Refer to "CONSULT FUNCTION (METER/M&) ".

    Self-diagnostic results content 

    No malfunction detected>>Repair or replace the cause of symptom. Then, GO TO 4

    Malfunction detected>>Refer to "DTC INDEX ". Then, GO TO 4

  4. CONFIRM OPERATION

    Does the combination meter operate normally?

    YES or NO 

    YES: Inspection End.

    NO: GO TO  1

About FixVault