Zone Variation Setting Procedure

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

The difference between magnetic north and geographical north can sometimes be great enough to cause false compass readings. This difference is known as variance. In order for the compass to operate properly (accurately) in a particular zone, the zone variation must be calibrated using the following procedure.

Fig 1: Zone Variation Chart

Courtesy of NISSAN NORTH AMERICA, INC.

Determine your location on the zone map.
Turn the ignition switch to the ON position.
Press and hold the (N) switch (with HomeLink™ universal transceiver) or the mode switch (without HomeLink™ universal transceiver) until the current zone number is displayed.
Press the mode or (N) switch repeatedly until the desired zone number appears in the display.

Once the desired zone number is displayed, stop pressing the mode or (N) switch and the display will show a compass direction after a few seconds.

NOTE: Use zone number 5 for Hawaii.