FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 2347 (Engine Control System - DTCS P1211 To P2A03) › DTC P1226 TP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat step  3 to  4 for 32 times.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault