FixVault

With Consult-II

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the coolant level in the reservoir tank and radiator.

    Allow engine to cool before checking coolant level. 

    If the coolant level in the reservoir tank and/or radiator is below the proper range, skip the following steps and go to "Diagnostic Procedure ".

  2. Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to "Diagnostic Procedure ".
  3. Turn ignition switch ON.
    Fig 1: Proper Coolant Level In The Reservoir Tank
    G00720397Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-II.
    Fig 2: CONSULT-II Display Screen
    G00720398Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If the results are NG, go to "Diagnostic Procedure ".