FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 4 (Air Bag Restraint System) › Diagnostics › Clearing Codes › Using Consult Tester

Using Consult Tester

WARNING: This page is about a different car, the 2000 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. After repairing system, connect both battery cables, connect CONSULT to DLC and turn ignition on. Touch START. Touch AIRBAG. Touch SELF-DIAG (CURRENT). If no malfunction is detected, repair is complete. Touch ERASE to erase problem retained in memory. If trouble code is not erased, AIR BAG warning light will continue to indicate a malfunction.
  2. If fault message is displayed, either the malfunction has not been repaired, or another malfunction is detected. Repair malfunction as necessary.
  3. Touch BACK button. Touch SELF DIAG (PAST). Ensure no self-diagnostic fault message is present. Touch BACK until SELECT SYSTEM appears. Turn off CONSULT. Disconnect CONSULT from DLC. Turn ignition off.
About FixVault