FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 423 (Engine Control System - DTC) › DTC P0453: EVAP Control System Pressure Sensor › Diagnostic Procedure › 9. Check Rubber Tube For Clogging

9. Check Rubber Tube For Clogging

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect rubber tube connected to EVAP canister vent control valve.
  2. Check the rubber tube for clogging.

OK or NG 

  1. OK: GO TO 10.
  2. NG: Clean the rubber tube using an air blower.
About FixVault