FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 576 (Combination Switch - Sedan) › Combination Switch › CONSULT-II Function (BCM) › Data Monitor › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "COMB SW" on "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on "SELECT MONITOR ITEM" screen.
    DATA MONITOR

    ALL SIGNALS Monitors all the signals.
    SELECTION FROM MENU Selects item and monitor them.
  4. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all signals will be monitored.
  5. Touch "START".
  6. Touch "RECORD" while monitoring, then the status of monitored item can be recorded. To stop recording, touch "STOP".
About FixVault