Park/Neutral Position Switch
WARNING: This page is about a different car, the 2002 Nissan Sentra, 2002 Nissan Quest, 2002 Nissan Maxima, and 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove shift linkage from manual shaft.
- Set manual shaft in Neutral.
- Loosen PNP switch bolts.
- Insert .16" (4 mm) pin into adjustment holes in both PNP switch and manual shaft assembly as near vertical as possible. See Fig 1 .
- Reinstall any part removed.
- Check continuity of PNP switch. See appropriate DIAGNOSIS article.