FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 75 (Air Bag Restraint Systems) › Diagnostics › Clearing Codes › Using CONSULT Tester

Using CONSULT Tester

WARNING: This page is about a different car, the 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. After repairing system, connect both battery cables. Connect CONSULT tester to Data Link Connector (DLC). See Figure . Turn ignition on. Touch START. Touch AIRBAG. Touch SELF-DIAG (CURRENT). If no fault message malfunction is detected, repair is complete. Touch ERASE to erase problem retained in memory. If trouble code is not erased, AIR BAG warning light will continue to indicate a malfunction.
  2. If fault message is displayed, either malfunction has not been repaired, or another malfunction is detected. Repair malfunction as necessary.
  3. Touch BACK. Touch SELF DIAG (PAST). Ensure no self-diagnostic fault message is present. Touch BACK until SELECT SYSTEM appears. Turn off CONSULT tester. Disconnect CONSULT tester from DLC. Turn ignition off.
About FixVault