Operation Procedure

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Touch "SEAT BELT ALM" on "SELECT TEST ITEM" screen.
Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
Touch "ALL SIGNALS" or "SELECTION FROM MENU" on "DATA MONITOR" screen.

Fig 1: All Signals Operation Procedure
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START".
If "SELECTION FROM MENU" is selected, touch the item desired to monitor. If "ALL SIGNALS" is selected, all selected test item related signals are monitored.
During monitoring, touching "COPY" will print the monitored item status.