Removal And Installation: Removal
WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Remove center console. Refer to CENTER CONSOLE ASSEMBLY .
- Disconnect harness connector.
- Remove installation nuts. Remove yaw rate/side/decel G-sensor.
CAUTION:
- Do not drop or strike the yaw rate/side/decel G-sensor, because it has little endurance to impact.
- Do not use power tool etc., because Yaw rate/side/decel G sensor is weak for the impact.