FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Re4F04B › DTC U1000 Can Communication Line › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch to ON position. (Do not start engine.)
  2. Select "DATA MONITOR" mode for "ENGINE" with CONSULT-II.
  3. Start engine and wait for at least 6 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Consult II Display
G00901753Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault