With GST
NOTE:
Be sure to read the explanation of Driving Pattern
before driving vehicle.
- Start engine.
- Drive vehicle according to Driving Pattern .
- Stop vehicle.
- Select MODE 1 with GST.
- If SRT of EVAP system is not set yet, go to the following step.
- If SRT of EVAP system is set, the result will be OK.
- Turn ignition switch OFF and wait at least 5 seconds.
- Start engine.
It is not necessary to cool engine down before driving.
- Drive vehicle again according to the Driving Pattern .
- Stop vehicle.
- Select MODE 3 with GST.
- If P0442 is displayed on the screen, go to Diagnostic Procedure .
- If P0441 is displayed on the screen, go to Diagnostic Procedure .
- If P0442 and P0441 are not displayed on the screen, go to the following step.
- 10. Select MODE 1 with GST.
- If SRT of EVAP system is set, the result will be OK.
- If SRT of EVAP system is not set, go to step 6.