Procedure For Malfunction A

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10.5V with ignition switch ON. 

With CONSULT-II 

1. Turn ignition switch ON.
2. Select "DATA MONITOR" mode with CONSULT-II.
   Fig 1: Identifying Display

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Wait at least 2 seconds.
4. If 1 ST trip DTC is detected, go to Diagnostic Procedure 

With GST 

Follow the procedure "With CONSULT-II".