FixVault
Home › Nissan-Datsun › 2004 › Xterra SE, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - VG33E › DTC P0460: Fuel Level Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait maximum of 2 consecutive minutes.
  4. If 1st trip DTC is detected, go to Diagnostic Procedure .
Fig 1: Identifying Display
G00870278Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault