FixVault
Home › Nissan-Datsun › 2005 › 350Z 2D Convertible, Standard › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P0550: PSP Sensor › Component Inspection › Power Steering Pressure Sensor

Power Steering Pressure Sensor

  1. Reconnect all harness connectors disconnected.
  2. Start engine and let it idle.
  3. Check voltage between ECM terminal 12 and ground under the following conditions.
    VOLTAGE CONDITION

    Condition Voltage
    Steering wheel: Being turned. 0.5 - 4.5V
    Steering wheel: Not being turned. 0.4 - 0.8V
    Fig 1: ECM Connector Terminal 12 & Ground Voltage Test
    G02401747Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault