ECM Inspection Table

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Inspection Table (1 Of 9)

G02401285

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Inspection Table (2 Of 9)

G02401286

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Inspection Table (3 Of 9)

G02401287

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: ECM Inspection Table (4 Of 9)

G02401288

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Inspection Table (5 Of 9)

G02401289

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Inspection Table (6 Of 9)

G02401290

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Inspection Table (7 Of 9)

G02401291

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Inspection Table (8 Of 9)

G02401292

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: ECM Inspection Table (9 Of 9)

G02401293

Courtesy of NISSAN MOTOR CO., U.S.A.