Removal and Installation: Installation

Installation is in the reverse order of removal.

• When installing stabilizer, make sure that the clamps are facing in the correct direction as shown.
  Fig 1: Installing Stabilizer Clamps Facing In Correct Direction

  Courtesy of NISSAN MOTOR CO., U.S.A.
• Make sure that slit in bushing is in the position as shown.
• Lubricate the inner and outer surfaces of the bushing using a silicone lubricant.
  Fig 2: Identifying Slit In Bushing In Position

  Courtesy of NISSAN MOTOR CO., U.S.A.