FixVault
Home › Nissan-Datsun › 2005 › Armada LE, RWD › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P1805: Brake Switch › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Fully depress the brake pedal for at least 5 seconds.
  3. Erase the DTC with CONSULT-II.
  4. Select "DATA MONITOR" mode with CONSULT-II.
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
    Fig 1: CONSULT-II Display - "DATA MONITOR" Mode
    G02444132Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault