FixVault
Home › Nissan-Datsun › 2005 › Frontier XE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System (Qr) - Component Testing › Ignition Signal › Component Inspection › Condenser-1

Component Inspection: Condenser-1

  1. Turn ignition switch OFF.
  2. Disconnect condenser-1 harness connector.
  3. Check resistance between condenser-1 terminals 1 and 2.

    Resistance: Above 1 MΩ [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Condenser-1 Terminals 1 And 2
    G03593501Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault