FixVault
Home › Nissan-Datsun › 2005 › Maxima SL › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P1225: TP Sensor › DIAGNOSTIC TROUBLE CODES Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE 
    Fig 1: CONSULT-II Data Monitor Screen
    G02410437Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault