Lighting Switch Inspection
WARNING: This page is about a different car, the 2005 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK LIGHTING SWITCH INPUT SIGNAL
With CONSULT-II
Select "BCM" on CONSULT-II. With "HEAD LAMP" data monitor, make sure "AUTO LIGHT SW" turns ON-OFF linked with operation of lighting switch.
- When lighting switch is in: AUTO LIGHT SW ON
- AUTO position
Without CONSULT-II
Refer to Combination Switch Inspection .
OK or NG
- OK: Inspection End.
- NG: Check lighting switch. Refer to Combination Switch Inspection .