FixVault
Home › Nissan-Datsun › 2005 › Maxima SL › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belts › Precautions › Precaution for Seat Belt Service › Notes

Precaution for Seat Belt Service: Notes

CAUTION:
  • Before removing the seat belt pre-tensioner assembly, turn the ignition switch off, disconnect the battery ground cable and wait at least 3 minutes. 
  • Do not use electrical test equipment for seat belt pre-tensioner connector. 
  • After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-tensioner connector, check the system function. Refer to  SRS OPERATION CHECK  . 
  • Deploy seat belt pre-tensioner assembly before disposing. Refer to  DISPOSAL OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER  . 
  • Do not use disassembled buckle or seat belt assembly. 
  • Replace anchor bolts if they are deformed or worn out. 
  • Never oil tongue and buckle. 
  • If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt assembly. 
  • If webbing is cut, frayed, or damaged, replace seat belt assembly. 
  • When replacing seat belt assembly, use a genuine NISSAN seat belt assembly. 
About FixVault