FixVault
Home › Nissan-Datsun › 2005 › Pathfinder LE, RWD › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P1226: TP Sensor › Diagnostic Trouble Codes Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: CONSULT-II Display - Data Monitor Mode
    G02432144Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch OFF, wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat steps 3 and 4 for 32 times.
  6. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
About FixVault