FixVault
Home › Nissan-Datsun › 2005 › Pathfinder LE, RWD › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P1706: PNP Switch › Overall Function Check › With GST

With GST

  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 102 (PNP switch signal) and ground under the conditions listed in ECM TERMINAL 102 VOLTAGE SPECIFICATION .
    ECM TERMINAL 102 VOLTAGE SPECIFICATION

    Condition (Gear position) Voltage V (Known-good data)
    P or N position Approx. 0
    Except above position BATTERY VOLTAGE (11 - 14V)
    Fig 1: Checking Voltage Between ECM Connector Terminal 102 (PNP Switch Signal) And Ground
    G02432380Courtesy of NISSAN MOTOR CO., U.S.A.
  3. If NG, go to DIAGNOSTIC PROCEDURE .
About FixVault